Close

 

Safety Training Program in Colorado

 

IECRM offers five different safety training programs for the electrical and construction fields, at its main campus in Denver, Colorado. Whether you’re looking for OSHA classes for field staff or management, or NFPA 70e training, we have it all. Many of our classes are night or weekend classes. An overview some of the safety classes offered are listed below. Click here to see a list of upcoming safety classes.

***

OSHA 10-Hour

OSHA 10-Hour class in Denver, CO

One of our most popular classes, OSHA 10-Hour is designed to give field staff, supervisors, and entry-level safety personnel a basic understanding of the OSHA requirements, and will offer practical solutions for implementing safe work practices. The class will help establish a solid foundation for effective safety programs and regulatory compliance.

Upon successful completion of the course, an OSHA 10 hour card will be provided.

OSHA 30-Hour

  • As Needed – please email us the date you would like and how many people you have to send: [email protected]

OSHA 30-Hour class in Denver, CO

OSHA 30 is our targeted, six-week training program for supervisors and more experienced safety personnel. Includes general information about OSHA, such as an overview of the department, handling inspections, and tips on how to locate specific regulations. The course then goes on to address each sub part of the OSHA Construction Standards, including an in-depth overview of OSHA regulations, safety and health management, OSHA “Focus Four” hazards, PPE, confined space entry, ergonomics, cranes, derricks, hoists, elevators, and conveyors, industrial vehicle safety, excavations, and hand/power tool safety.

Upon successful completion of the course, an OSHA 30 hour card will be provided.

NFPA 70e for Field Staff

NFPA Field Staff Training in Denver, CO

This NFPA 70e class is for field staff.

Focuses on the latest NFPA 70e arc flash electrical safety standard that addresses arc flash electrical safety requirements for employee workplaces that are necessary for the practical safety of employees. Electrical dangers such as shock, electrocution, electrical explosion, and arc blast will always be present on the job, but a proper electrical safety training program and strategies can minimize the likelihood of injuries and fatalities.

NFPA 70e for Supervisors

NFPA Supervisor Training class in Denver, CO

This NFPA 70e class is for supervisors, and is more in-depth than the field staff class, as it provides charts and data tables with regards to energized electrical work, PPE, lockout/tagout, and safe work practices. There will be a hands-on component to help reinforce course content.

Like the Field Staff class, this class focuses on the latest NFPA 70e arc flash electrical safety standard that addresses arc flash electrical safety requirements for employee workplaces that are necessary for the practical safety of employees. Electrical dangers such as shock, electrocution, electrical explosion, and arc blast will always be present on the job, but a proper electrical safety training program and strategies can minimize the likelihood of injuries and fatalities.

 

IECRM has partnered with United Academy to offer our members more of the training and certifications needed in the industry. Click here to sign-up for a United Academy class listed below.

Courses Offered:

In-Class & Online (Blended):

  • Aerial Boomlift Operator Certification – Blended
  • Scissor Lift Operator Certification – Blended
  • Aerial Boom and Scissor Lift Operator Certification – Blended
  • Aerial Boomlift 3b Operator Recertification- Blended
  • Counterbalance and Rough Terrain Forklift Operator Certification Combination – Blended
  • Counterbalance and Rough Terrain Forklift Operator Recertification Combination – Blended

Instructor Led/Onsite Training:

  • Aerial Boomlift Operator Certification
  • Aerial Boomlift Operator Recertification
  • Scissor Lift Operator Certification
  • Scissor Lift Operator Recertification
  • Aerial Boom and Scissor Lift Operator Certification
  • Aerial Boom and Scissor Lift Operator Recertification
  • Counterbalance & Rough Terrain Forklifts Operator Certification
  • Counterbalance & Rough Terrain Forklifts Operator Recertification

Fully Online Training:

  • Confined Space Entry Training (CSE) Online (English)
  • Conducting Performance Appraisals
  • General Construction Guidelines
  • Hazardous Waste Management Requirements
  • HAZWOPER 2020 Refresher (8-Hour) Course
  • HAZWOPER 40

Click here to sign up for any of the United Academy classes listed above.

 

For a list of all upcoming classes please click here.

Getting Started Program

"*" indicates required fields

Name*
This field is for validation purposes and should be left unchanged.

Getting Started

"*" indicates required fields

Name*
This field is for validation purposes and should be left unchanged.

IECRM Self-Pay Tuition Policy

 

Self-pay students who are employed with a member company must register and pay through the member company using the IECRM Flashpoint Enrollment Portal/Process in order to qualify for member rates.

Self-pay students that are employed with a member company but that do not register and pay through the member will be charged the non-member rate for tuition, books and applicable fees.


Self-pay students who are employed with a member company and require a payment plan will not qualify for the member rate and will be charged the non-member rate for tuition, books and applicable fees.


Self-pay students who do not work for a member company will continue to be charged the non-member rate for tuition, books and applicable fees.


To maximize association/membership benefits, ALL member companies are encouraged to register and pay for all enrolled apprentices utilizing internal payment arrangements and processes between employer and employee.


We value our IECRM members and apprentice community. We encourage all apprentices to be enrolled in the four-year apprenticeship program, earning, and learning their way toward Journeyworker licensure. We encourage all members to utilize the member discount for tuition, books and applicable fees to ensure the long-term support and success of the next-generation electrician.


(Payment Plans are available, please reference the Self Pay Payment Plan Policy.)


Self-Pay Payment Plan Policy


We offer the following arrangements for students that are unable to pay in full at the time of registration.


● Self-pay students will be charged the non-member rate.
● A 50% down payment of total semester tuition, books and applicable fees are due at registration.
● Remaining balance can be divided up to 3 additional monthly payments ($10.00 processing fee applies on each installment)
● All payments that are declined will incur a $20.00 NSF fee.

 

We encourage all students who are employed with a member company to work with their employer to register and pay through the IECRM Flashpoint Enrollment Portal/Process. This will ensure the student is paying the lowest possible rate for tuition, books and applicable fees.